dB Technologies DVA T12W 12-Inch Active Line Array Speaker, White

dB Technologies DVA T12W 12-Inch Active Line Array Speaker, White
DVA T12 features state-of-the-art neodymium speakers and high-performance DIGIPRO digital amps with total of 1,410W output power.
In combination with top-drawer DSP and premium quality AD-DA converter, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications.
A 12” neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable full range applications. The 12” woofer is slanted inside the housing, giving the cabinet a lean, unobtrusive look.
Two 6.5” neodymium midrange is placed close together to maximize coherent coupling and response for those critical midrange frequencies.
The speaker resides in a sealed basket to optimize the displacement volume. This makes the midrange even more responsive. With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5” midrange is equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern.
The DVA T12 is loaded with 3 1” HF drivers tuned specifically for the custom designed array horn. This combination maximizes the coupling of the drivers’ outputs and extends the range of the HF signal.
Key Features
Long-throw system
Fully powered 3-way unit
Freely scalable to setups of any size
High-end digital controller on board
Network ready with integrated RDNET port
Hardware compatible with DVA T8 and T4
Technical Specifications
Speaker Type 3-Way Active Line Array Module Acoustical data Frequency Response 60 – 19.000 Hz Max SPL One Unit: 136 dB HF 3×1” Voice Coil HF 1.4” Directivity 100×10 Degrees Single unit Horn Integrated CD Horn MF 2x 6.5” Type MF Neodymium Sealed Basket Phase Plug Horn Loaded Voice Coil MF 2” LF 12” Type LF Neodymium Voice Coil LF 3” Amplifier Amp Technology Digipro G2 Amp Class Class D HF Amp 350 W RMS MF Amp 350 W RMS LF Amp 710 W RMS Cooling Convection Processor Controller DSP 56 bit AD/DA Converter 24 bit/96 kHz System Presets 8, HF/Low-mid correction Limiter Dual Active Limiter Multiband RMS, Peak, Thermal Crossover Frequency MF-HF 1800 Hz Slope MF-HF 24 dB/Octave Crossover Frequency LF-MF 420 Hz Slope LF-MF 24 dB/Octave Input Signal Input 1x XLR fem, Bal. Signal Output 1x XLR male, Bal. Network RDnet remote control RJ45 connector IN/OUT Power Socket 1x Powercon In 1x Powercon Out Voltage Range 90 – 240 V Mechanics Housing Polypropylen PP Aluminum reinforced Housing Design Trapezoidal 10° Rain Cover Included Rigging Points Integrated rigging hardware Width 580 mm (23.2 in) Height 386 mm (15.44 in) Depth 430 mm (17.2 in) Weight 29.9 kg (63.93 lbs)