Martin Audio WPS 2 x 8-Inch Passive 3-Way Line Array

Martin Audio WPS 2 x 8-Inch Passive 3-Way Line Array
WPS is a 3-way passive, 2 x 8” small line array featuring scalable resolution optimisation. This flexible approach to array optimisation provides greatly improved coverage, consistency and control compared to a standard line array.
The WPS is a versatile, state-of-the-art line array with a peak SPL of 133dB and is designed for small-to-medium scale touring and install applications that require a high output array with reduced weight and footprint. With exemplary coverage consistency and superb sound performance, the flexibility of WPS makes it an ideal system for live sound reinforcement and installations in theatres, concert halls and Houses of Worship. Return-on-investment within a rental company’s inventory is maximised by also deploying WPS arrays as front-fill, delay or side-hang support for larger WP systems.
WPS is a passive 3-way system which integrates a high density of drive units in a very compact enclosure. It features 2 x 8” (200mm) LF drivers, 4 x 4” (100mm) midrange drivers and 4 x 1” (25mm) exit HF compression drivers loaded by a moulded HF horn which occupies the full width of the enclosure — defining the 100° horizontal constant directivity coverage pattern of both the HF and midrange sections.
The 4” midrange drivers are compression-loaded to raise efficiency and enter the horn walls via annular slots close to the HF throat to sum effectively with the HF wavefront. In the HF section, four 1” exit compression drivers deliver pristine high frequency sound without the harshness and distortion associated with larger format devices.
The 8” LF drivers are set back behind the walls of the HF horn, with a small volume of air in front of each driver increasing the output at the upper end of its operating range. The LF exit apertures are spaced apart horizontally to provide useful LF horizontal pattern control.
For extended low frequency performance, WPS is designed to be partnered with the SXC118 cardioid subwoofer or its flyable variant, the SXCF118.
Benefits
Consistent coverage achieved ‘straight-out-of-the-box’
DISPLAY intelligent software reduces set-up time and eliminates trial-and-error
Improved audience coverage with reduced sound-spill
Applications
Touring sound reinforcement for small and medium-size venues
Fixed installations in concert halls, theatres, ballrooms and HoW
Sports stadium, arena installations & corporate AV events
Key Features
3-way passive, 2 x 8” small line array

Scalable resolution for advanced array control

External, dedicated, multi-channel Class D amplification

Industry-leading DISPLAY software interacts with DSP for highly-accurate results

Fast, integral 3-point flying systems for up to 16 enclosures

Side and rear handles for ease of handling and setting splayangles

100° horizontal constant directivity pattern control
Technical Specifications
TYPE
Three-way, passive line array element
FREQUENCY RESPONSE
70Hz-18000Hz ± 3dB
DRIVERS
LF: 2 x 8” (200mm)/2” (50mm) voice coil, long excursion, vented yoke, neodymium magnet drivers
MF: 4 x 4” (100mm)/1” (25mm) coil, neodymium magnet drivers, compression loaded
HF: 4 x 1” (25mm) exit/1.4” (35mm) HT Polymer diaphragm, neodymium magnet compression drivers
SYSTEM AMPLIFIER
iKON iK42
SYSTEM RESOLUTION
1 to 3 enclosures per amplifier channel (iK42)
MAXIMUM SPL
133dB peak
NOMINAL IMPEDANCE
6Ω
DISPERSION (-6DB)
100º horizontal (-6dB), 120º horizontal (-10dB)
10° vertical
CROSSOVER
520Hz, 1.6kHz internal passive
ENCLOSURE
Vertical trapezoid with 5º wall angle,
multi-laminate birch and poplar-ply construction
FINISH
Black textured paint
PROTECTIVE GRILLE
Black HEX perforated steel
CONNECTORS
2 x NL4 type
INPUT CONNECTIONS
1+/1-
FITTINGS
3-point rigging system
2 x side pocket handles
2 x rear grip handles
FLOWN ARRAY MAXIMUM
16 (installation) and 24 (touring) enclosures in a single array
DIMENSIONS
(W) 650mm x (H) 261mm x (D) 400mm
(W) 25.6in x (H) 10.3in x (D) 15.8in
WEIGHT
27kg (60lbs)